Boracare with Mold-Care (NOT FOR SALE IN NY, AK)

Rating:

96% of 100

$149.85

Out of stock

Only 0 left

SKU

BM001

Local Pick-Up ONLY. Bora-Care with Mold Care is a unique product that acts as an insecticide, termiticide and fungicide. Bora-Care is a powerful residual insecticide/termiticide formulated specially for wood-boring insects such as termites, carpenter ants and wood destroying beetles. Combining Bora-Care with Mold Care greatly amplifies the efficiency of the Bora-Care in protecting structural components of buildings. By adding a second protective barrier for molds, Bora-Care residues are preserved and overall structural components are conserved.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Product Description

Bora-Care Product Label

PDF Bora-Care Material Safety Data Sheet (MSDS)

PDF Mold-Care Product Label

BoraCare with Mold-Care

From the world leader in borate technology, Nisus Corporation introduces a revolutionary product that combines the function of an insecticide, termiticide and fungicide. Bora-Care with Mold Care not only prevents and controls wood boring insects, it also prevents mold, fungi and mildew that can destroy wood, concrete and other building materials. With a guaranteed residual effectivity of up to 12 years, Bora-Care with Mold Care is the ultimate residual protection for homes and other structures.

Why Should You Use BoraCare with Mold-Care?

Bora-Care with Mold-Care provides one of the longest residual protections against wood boring insects and fungi. Residues of the product remain active for up to 12 years!

Target Pest(s):	Fungi, Molds, Algae, Termites and other wood-boring insects
Manufactured By:	Nisus
Active Ingredient:	Bora-Care : Disodium Octaborate Tetrahydrate - 40% Mold-Care : Didecyl dimethyl ammonium chloride - 80%
Size:	1 gallon
Yield/Application:	1 pt. of Mold-Care and 1 gal. of Bora-Care to 5 gals. of water
Not For Sale To:	NY

Directions for Bora-Care with Mold-Care Use

Bora-Care and Mold-Care are concentrates that must be diluted with clean water before use. Mix one pint of Mold-Care per gallon of Bora-Care and dilute the concentrate in 5 gallons of water. Stir the solution until uniform. Dilutions must be mixed in a separate container first before adding the mixtures into sprayer tanks. Apply the product using the appropriate equipment and methods. Bora-Care is NOT a soil termiticide and therefore must not be applied as such.

Bora-Care may be used in treating cellulosic materials such as wood, plywood, oriented strand board (OSB), paper, cardboard and wood composites. It is recommended conduct pretreatments during construction where greater access to structural wood members is available.

Treat all wood members especially base plates and studs that surround moist areas such as bathrooms, kitchens, laundry rooms and plumbing. Treat trusses, joists, rafters and other overhead components.

Apply Bora-Care with Mold-Care to BARE exterior walls only. Paint and other finishes must first be removed prior to treatments. Do NOT apply when raining or snowing.

Bora-Care with Mold-Care may be used in dip treating logs and lumber at the rate of one gallon of Bora-Care solution per 400 board feet of wood.

Where to Use Bora-Care with Mold-Care

Bora-Care with Mold-Care is labeled for use in and around homes, apartment, garages, schools, hotels, public and private institutions, farm buildings, trailers, commercial and industrial buildings.

Please refer to the product label for application instructions for control of specific pests.

Reviews 15

Write Your Own Review

You're reviewing:Boracare with Mold-Care (NOT FOR SALE IN NY, AK)

Your Rating

Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Summary

Review

QuestionsAnswers

Do You Have a Question about this Product? Ask Our Experts!

Q. boracare?

A. Boracare does not have a factory seal under the lid. We do not sell a mixer to go with Boracare. Boracare should be mixed with water in various dilution rates depending on the target pest. For termites, the dilution rate of water to Boracare is 1:1. For wood boring beetles like powderpost beetles, the dilution rate of water to Boracare is 1:3. Boracare has a lifetime residual. Treatments should last at least 8-10 years.

Was this helpful?

Yes

Votes

Q. Bora-Care with Mold-Care?

A. It has proven and tested that this product remains active for up to 12 years.

Was this helpful?

Yes

Votes

Q. Bora-Care with Mold-Care Mix...?

A. No, we recommend mixing this product and water in a clean container and stir the solution until completely uniform. Always mix in a separate container then add the solution to a spray tank. Mixing Bora-Care directly in a spray tank can block hoses and nozzles.

Was this helpful?

Yes

Votes

Q. Do I have to mix water with Bora-Care with Mold-Care??

A. Yes, Bora-Care is a concentrate that must be diluted with clean water before use. The use of warm or hot water, if available, and an impeller-type mixer that can be used with an electric drill aids the dilution process.

Was this helpful?

Yes

Votes

Q. How will I treat infested wood with this product??

You will need to treat infested wood by spraying and/or injecting Bora-Care solution into beetle holes, termite and carpenter ant galleries and decay pockets.

Apply 1 coat of Bora-Care solution to the point of wetness to all infested and susceptible wood, paying particular attention to infested areas. 2 coats of Bora-Care solution need only be applied to those wood members with only 1 or 2 exposed sides.

For quicker control, apply an additional coat to heavily infested areas, waiting at least 20 minutes between applications.

Keep in mind that the wood should be bare before an entire surface treatment or coating so that the insecticide can soak into the wood much easier than it would on a finished surface.

Was this helpful?

Yes

Votes

Q. How much area can 1 gallon of Bora-Care with Mold-Care cover??

A. According to the product label that 1 gallon of Bora-Care concentrate (2 gallons of Bora-Care solution as applied) will treat 800 board feet of wood to a minimum retention level of 0.084 pounds per cubic foot boric acid equivalent (BAE). Since the active ingredient penetrates throughout the wood being treated, calculate the amount of Bora-Care needed on the volume of wood being treated, not just the surface area. Please use the formulas that are in the product label to calculate the required amount of Bora Care that is necessary for treatment.

Was this helpful?

Yes

Votes

Q. . Can I apply this product in soil in treating insects??

A. No, Bora-Care with Mold-Care is intended for wood pieces only.

Was this helpful?

Yes

Votes

Q. Bora Care ?

A. We recommend letting the Bora Care to completely dry for at least 48 hours before applying protective topcoat.

Was this helpful?

Yes

Votes

Q. Can Bora-care be applied by home owner? And how.?

A. Yes, it can be. And how you apply will depend on the target pest and where you are treating. Usually, the product is diluted with water and sprayed or painted on but the dilution will vary depending on the pest. The dilution rates of Boracare with Mold-Care can all be found on the product label as well as directions for application.

Was this helpful?

Yes

Votes

Q. boracare application?

A. Yes, we recommend vacating the area or room that is being treated and let Boracare with Mold-Care dry for few hours. As long as the product has completely dried, it is safe to re-enter the room.

Was this helpful?

Yes

Votes

Q. borate wood treatment?

A. For borate wood treatment with Boracare with Mold-Care, Wood flooring can be treated by spray, brush or roller application.

Was this helpful?

Yes

Votes

Q. I think you may have a typo on your ingredient percentages. 40 percent one ingredient and 80 percent of another is the disodium borate percentage the same as in the regular Boracare ??

A. The Boracare active ingredient is 40% Disodium Octaborate Tetrahydrate and the Moldcare is made with 80% Didecyl dimethyl ammonium chloride. If you have any further questions or comments, please feel free to contact us again.

Was this helpful?

Yes

Votes

Q. What is the boracare mixture for one gallon use.?

A. In most cases, Boracare is used at a 1 to 1 ratio. Please refer to the product label for detailed instructions for specific pests/infestations.

Was this helpful?

Yes

Votes

Q. Overspray is a fact. How long do you have to wait to paint over overspray? Will Bora-care Mold change the color of natural, grayish barn wood and/or surrounding painted surface??

A. You must wait at least 24 hours. It will not normally change or discolor wood, however, you may want to test an inconspicuous area to test for discoloration. If you have any further questions or comments, please feel free to contact us again.

Was this helpful?

Yes

Votes

Q. Will Boracare with mold care kill existing mold and prevent it from coming back??

A. It will clean off the mold on surfaces as well as preserve the wood to protect it from further infestation. However, some of the non-chemical treatments will require you to get rid of the humidity and moisture source so that mold cannot thrive. If you have any further questions or comments, please feel free to contact us again.

Was this helpful?

Yes

Votes

Q. Can The Boracare with mold care be used on concrete walls? (for mold care) If not, what do you suggest I use? ?

A. It is not typically used for concrete as it is a product that is essentially a wood preservative. We recommend Mold Clean, which cleans off mold from many surfaces. If you have any further questions or comments, please feel free to contact us again.

Was this helpful?

Yes

Votes