CB D-Force - 14 oz. (Not for Sale to: AK)

Rating:
89% of 100
$25.99
In stock
SKU
A0019

CB D-Force is a broad spectrum label contact insecticide for direct kill and residual control of household pests such as ants, bedbugs and cockroaches. D-Force is also effective in controlling and eliminating subterranean species of termites, carpenter ants and carpenter bees.

CB D-Force - 14 oz.

The CB D-Force  is one of the best-selling aerosol insecticides in the market. D-Force provides fast killing action and residual control over 50 species of pest insects. Properly applied, the product residues remain potent for up to 8 weeks, making the product an ideal supplement to several types of bait. Both the D-Force  and D-Foam contain low concentrations of the synthetic insecticide Deltamethrin. Low active ingredient and volatile organic compound (VOC) content makes the product ideal for use in residential and food-handling areas of buildings.

Why Should You Use CB D-Force ?

CB D-Force has a broad spectrum label, long residual half-life and a powerful formula to effectively control invasive pests.

Target Pest(s): Ants, Bees, Bedbugs, Carpet Beetles, Centipedes, Cockroaches, Crickets, Firebrats, Fleas, Flour Beetles, Grain Beetles, Ground Beetles, Gnats, Midges, Mole Crickets, Moths, Pillbugs, Silverfish, Sowbugs, Spiders, Ticks and Many Other Crawling Insects, Carpenter Ants and Carpenter Bees.
Manufactured By:  FMC
Active Ingredient: Deltamethrin - 0.06%
Size: 14 oz.
Not For Sale To: For sale to ALL states

Directions for CB D-Force Use

Shake well before each use. Hold the container upright and hold the can 12 to 15 inches away from treatment areas. Use the supplied actuator for crack and crevice treatments. Direct the nozzle towards the treatment area and apply the product as recommended in the product label.

Spray sufficient amounts of CB D-Force directly over insects or to sites where pests are seen. Pay particular attention to areas harboring insects such cracks and crevices, under appliances, sinks and other potential hiding and breeding spots. For bedbugs, remove beddings and apply the product in tufts, folds and the bed frame. Wash beddings before reusing.

CB D-Foam is suitable for surface applications, crack and crevice applications, spot treatments and wall void applications. To control subterranean termites in above-ground areas of structures, first locate galleries, voids and tunnels in wooden structural components using available location techniques. It is sometimes necessary to drill holes in order to access and inject foam into insect galleries. Apply the product to voids/areas where insects frequent, breed, and hide.

Carefully read the product label for application instructions and precautions.

Where to Apply CB D-Force 

CB D-Force is for use in and around: Homes, Apartments, Hospitals, Hotels, Food Handling Establishments, Restaurants, Food Processing Plants, Industrial Buildings, Storage Areas, Warehouses, and Transport Vehicles.

Please refer to the product label for application instructions for control of specific pests.

Write Your Own Review
You're reviewing:CB D-Force - 14 oz. (Not for Sale to: AK)
Your Rating

Do You Have a Question about this Product? Ask Our Experts!


Q. D Force HPX?
A.  The manufacturer just changed the colors on the can. It is still the same D Force product, and just different color lettering on the outside. We will update the picture.If you have any further questions or comments, please feel free to contact us again. Thank you.
Was this helpful?
Yes
7
Votes
Q. D-Force HPX insecticide labels?
A.  If properly applied, CB D-Force HPX residues remain potent for up to 8 weeks, making the product an ideal supplement to several types of bait as stated in D-Force HPX insecticide labels.
Was this helpful?
Yes
4
Votes
Q. d-force hpx?
A.  Yes, CB D-Force HPX is applicable indoor and outdoor. You will need to hold can on a slight downward angle, approximately 12-15 inches from surface to be sprayed.
Was this helpful?
Yes
17
Votes
Q. Getting Rid of Bed Bugs Yourself?
A.  Yes, bed bug is one the targeted pests of CB D-Force HPX. We recommend removing the beddings and apply the product in tufts, folds and the bed frame. Wash beddings before reusing.
Was this helpful?
Yes
16
Votes
Q. Safe Pest Control?
A.  Yes, For safe pest control, we recommend vacating pets and children from the area of application and can only re-enter as long as CB D-Force HPX has completely dries.
Was this helpful?
Yes
10
Votes
Q. Carpet Beetles Treatment?
A.  Yes, CB D-Force HPX is labeled for carpet beetles and is applicable on carpet. We recommend spraying the carpets where infestations are bad. It is also advisable to test first for staining on an inconspicuous piece prior to use.
Was this helpful?
Yes
15
Votes
Q. Bed Bugs How to Get Rid of Them?
A.  As stated in the product label that CB D-Force HPX will dry for at least 20 minutes from application. It is advisable to let the product dry for 30 minutes for safety.
Was this helpful?
Yes
11
Votes
Q. Treatment for Termites?
A.  In treating termite carton nests in trees may be spray injected with CB D-Force HPX using the supplied void injector. Multiple injection points to varying depths may be necessary. It is desirable to physically remove carton nest material from trees when such nests are found.
Was this helpful?
Yes
5
Votes
Q. Carpenter Ant Removal?
A.  Yes, CB D-Force HPX is labeled for carpenter ants. We recommend reading the product label on how to use this product in controlling this kind of pest.
Was this helpful?
Yes
7
Votes
Q. Restaurant Pest Control?
A.  Yes, CB CB D-Force HPX is labeled for food-handling areas. Applications are permitted in food/feed handling and processing establishments as a general surface, spot or crack and crevice treatment as stated in the product label.
Was this helpful?
Yes
12
Votes
Q. Pesticide Damage?
A.  If container is ruptured or begins to leak, place in a well-ventilated area free of sparks and ignition sources. CB D-Force HPX that cannot be used according to label instructions must be disposed of according to all applicable Local, State and Federal procedures.
Was this helpful?
Yes
13
Votes
Q. Spot Treatment?
A.  CB D-Force HPX is designed for use only with injection tube for injecting into cracks and crevices where insects may be hiding, living, and breeding, and limited applications to exposed surfaces. Place injector tip 1/2 inch into cracks, crevices, holes and other small openings where insects may be a problem. Release approximately 1 second spray per spot. In serious infestations, if possible place spots approximately 12 inches apart. In light infestations or preventative treatment, place spots approximately 3 feet apart.
Was this helpful?
Yes
6
Votes
Q. Pesticide Residue?
A.  CB D-Force HPX has residual action which keeps on killing for up to 8 weeks after you spray.
Was this helpful?
Yes
2
Votes
Q. Deltamethrin Products?
A.  CB D-Force HPX contains no chemicals that are listed on the NTP, IARC, or OSHA carcinogen lists. Any further information on the toxicology of the material can be obtained by contacting the manufacture.
Was this helpful?
Yes
2
Votes
Q. Will d-force kill stink bugs??
A.  Stink bugs are not on the product label for D-force. One of the only products that we carry that have stink bugs on the product label as a target pest is Lambdastar 9.7. Unlike D-Force though, it is not a instant knockdown aerosol. It is a liquid concentrate that must be diluted with water and sprayed on surfaces with a pump sprayer. It will, however, provide you with a long residual, unlike D-Force.
Was this helpful?
Yes
2
Votes
Q. Will d-force kill miller moths??
A.  It does not specifically label miller moths, but it does have moths on the label. We can assume that it will kill moths on contact.
Was this helpful?
Yes
20
Votes