Bed Bug Monitor and Glue Trap-4 Traps

We recommend inspecting the traps regularly every 1 to 2 months.

For severe infestations, check traps once or twice a week. Replace traps every 3-4 months.

Dust and debris build up can change the effectiveness of the glue on the trap. If there are bed bugs trapped on the Bed Bug Monitor and Glue Trap, dispose of used traps in a sealed plastic bag to avoid re-infestation.

Before bed bug trap placements, you need to make sure that the piece of furniture (bed, couch, chair, table, etc.) is moved away from the walls and that all sheets, blankets, pillows, and other objects are away from contact with the floor.

Position the legs of the furniture onto the center of the trap and avoid contact with the adhesive parts of the device.

The bed bug traps was purposely constructed with an inner circle base for convenience and easy placement.

Keep in mind, the inner circle can fit a leg with a maximum diameter of 4.33 inches (11 cm). Placing the traps under furniture legs with larger diameters will cover the glue adhesive and hinder the traps optimal performance.

If the leg of the furniture is larger than the diameter of the center, the best way you can use the trap is to purchase rubber cups at a local hardware store to slightly lift the furniture to slide the monitoring devices under.

Yes, as long as the area of the legs will not exceed the inner circle of the Eco Keeper Bed Bug Monitor and Glue Trap.

If you mattress bed leg is larger than the diameter of the center, you can purchase rubber cups at a local hardware store to slightly lift the furniture to slide the monitoring devices under.